CP GRADE 16
| Common Name | |
|---|---|
| CP Grade 16 | CP Grade 16 |
| CP Grade 2 with Lower Palladium | CP Grade 2 with Lower Palladium |
| Titanium Grade 16 | |
| UNS | |
| R52402 | |
| General Information | |
| Ti Grade 16 is an unalloyed titanium grade with standard oxygen content and addition of palladium (0.04–0.08%). The material has good toughness and is readily weldable. This material is very corrosion resistant in highly oxidizing and mildly reducing environments. The material is castable and is often utilized in cast valves and fittings. In plate form, the alloy is also used explosively boned to make clad plate. The alloy is available as castings, wire, welded tube, pipe, plate, sheet, strip, forgings, bar, and billet. | |
| Common Specification | |
| Specification | Product Form |
| ASME SB-265 | Sheet, Strip and Plate |
| ASME SB-338 | Seamless and Welded Tube |
| ASTM B265 (Grade 16) | Sheet, Strip and Plate |
| ASTM B348 (Grade 16) | Bars and Billets |
| ASTM B367 (Grade Ti-Pd 16) | Castings |
| AWS A5.16 ERTi-16 | Weld Wire |
| Chemistry Requirements | ||||||||
|---|---|---|---|---|---|---|---|---|
| N | C | >H | Fe | O | Pd | Residual Each Max | Residuals Max Total | Ti |
| 0.03 | 0.1 | 0.015 | 0.30 | 0.25 | 0.04-0.08 | 0.1 | 0.4 | Balance |
% Maximum unless given as a range.
| Minimum Tensile Properties | ||||
|---|---|---|---|---|
| Condition | UTS ksi (Mpa) | >0.2%YS ksi (MPA) | % El. | % RA* |
| As specified (shape) | 50 (345) | 40 (275) | 20 | 30 |
| Typical Tensile Properties | ||||
|---|---|---|---|---|
| Condition | UTS ksi (Mpa) | >0.2%YS ksi (MPA) | % El. | % RA* |
| As provided | 70 (438) | 51 (352) | 28 | – |
Note: Typical properties are not to be utilized as a requirement, but are only listed for guidance. These properties may or may not be attainable in all circumstances.
* %Ra not required by all specifications
Trademark Notice: Some names are trade names and/or trademarks of specific manufacturers. Titan Singapore is not affiliated with any manufacturer(s). Orders will be filled to meet specifications from any available source(s). Names are listed solely for reference to help identify products consistent with listed specifications.