Our Services

Titan Engineering provides titanium raw material to customers, but what we like to provide is that "first step" beyond the raw material.  We found that there were many customers who purchased rod/bar stock from us and when they received our material, their "next step" was to put a chamfer on the rod/bar.

Titan Engineering saw this as an opportunity to provide an "added value" service to this segment of the customer base.  Customers can now purchase rod or bar products, chamfered to their specifications. 

The benefits to the cust omer in this situation are that they now have one less operation to perform in their shop and reduced cycle time.   Offering a chamfered product creates manufacturing efficiencies in our customers shop that translate to costs savings. Titan Engineering has the capability to chamfer round bar/rod stock in sizes that range from 3.0 mm DIA to 300 mm DIA with a depth of 10.0mm.

It is important to Titan Engineering that our customers be able to purchase what they need with respect to sheet and strip products.  Many times a standard strip or sheet product does not satisfy our customer's needs.  It may be too big for their requirements.

Titan Engineering offers custom widths and lengths in Titanium sheets or foil products. In doing so, our customers realize great cost benefits because they don't have to buy more material than they actually need.

One of the cost savings recommendations we have for this product is for the customer give us a finished part size so that we can choose a product that is custom to one or multiples of the part. This correlates to spending less cash for the raw material as well as generating less scrap in the manufacturing process. The more cost effective opportunities we can offer to our customer base, the more competitive our customers can be in their marketplace.

With many years in the metals industry and much of it in fabrication of metal products, Titan Engineering has gained experience in the fabrication of the products we sell.  The work could be as simple as drilling a hole to a big machined fabrication. 

Please contact our sales personnel to see whether we can handle your fabrication works. If we could not meet your requirements, we will refer you to the best in the industry with whom you can contact directly. If you have a fabrication question or project, Titan Engineering welcomes the opportunity to work with you in answering your questions.

Providing a product with precision tolerances is a critical service many Titan Engineering customers require.  The precision tolerance is achieved via a grinding process which is simply a cutting operation that removes small chips (or kerf) of material. Titan Engineering has the ability to provide grinding services to tolerances on bar of 0.05 mm. Titan Engineering also has the capability to provide precision ground flat product. By providing a precision ground products our customers are able to save time in their manufacturing process.

Contact you Titan Engineering representative to discuss your specific grinding requirements.

Laser cutting titanium sheets to the customer specifications and drawings is one of the many cutting options available to Titan Engineering customers. When the customer is looking for a part with a precise, clean, smooth, straight edge, laser cutting may be the option that satisfies the customer's need. Just send us your part drawing and we will take care of all the works.

Titan Engineering can provide milling based upon specific customer requirements. The milling process is the progressive removal of a predetermined amount of metal from a work piece to achieve rough-cut mill finish. This is a value added service that Titan Engineering is able to offer customers.

In an effort to reduce in-house costs, Titan Engineering customers can ask for milling finish Ti blocks. Our customer's objective is to receive a product from Titan Engineering that is milled to their specification. In doing so, Titan Engineering has ultimately eliminated a manufacturing process in our customer's shop.

Please let us know whether you need 6-face square milling or top bottom face milling.

Saw cutting is the basic cutting process with us. Our customers may require bar, billet, plate, block, long products, round and rectangular, cut to specific dimensions. Titan Engineering is happy to accommodate. We have both cut off saws and plate saws to handle the heavy demand for this value added service. Our band saws can handle any round, rectangular or square product that we stock. Titan Engineering can cut 1 piece or 10,000 pieces as per your length requirements. No job is too small or no job is too large for us to handle. Our facilities enable us to provide quick turnaround on cut parts regardless of the volume.

Titan Engineering is pleased to offer precision water-jet cutting services for our Ti sheet/plates.
The benefits of water-jet cutting include:

• No heat affected zone where the cut was made
• No stress added to the material during the cutting process
• Reduction of secondary machining operations due to precision cutting tolerances
• Reduction of material consumption due to minimal kerf and utilization of nesting software
• Ability to cut complex parts
• Water-jet cutting provides near net shapes providing our customers with cost savings.

Titanium alloys can be challenging for machining. Wire Electrical Discharge Machining (EDM) is a non-contact, force-free industrial cutting process. In wire EDM, an electrical spark is used to cut different types of electrically-conductive materials, such as metals, carbides, alloys, and graphites.

In Wire EDM cutting, the material to be cut is submerged in a dielectric cutting fluid, usually deionized water. A thin single-strand wire electrode is placed over the material on a CNC-controlled robotic guidance system. An electric current is run through the wire, creating an electrical spark of intense heat (8000-12000°C). The electrical spark cuts the material by removing the metal content through melting and vaporization. The robotic guidance system guides the wire and the spark it generates over the cutting path for the desired pattern, but the wire does not touch the material. At the same time, the dielectric cutting fluid cools the material and flushes away particles that have been cut from it.

• EDM small hole drilling/Super Drilling/Hole popping was originally used for putting in starter holes for the Wire EDM machines. We still use it for this purpose everyday. We can put starter holes in as small as 0.5mm diameter and as deep as 200mm. It doesn't matter if the material is hard or soft, aluminum or titanium or carbide.

• Finished Goods – Stock finished goods at nominal annual stocking charge to dramatically reduce impact of what can be historical double-digit monthly price increases.
• Requirements Contract – Orders for specific duration including multiple years are routinely managed by Titan to provide just-in-time delivery that includes surge demand.  These are based upon total actual volume requirements of the customer and frequently his first tier suppliers.
• Fixed Volume Agreement – Orders for specific duration including multiple years are routinely managed by Titan to provide just-in-time delivery. These are based upon a fixed forecast volume of the customer.
• Semi-Finished Goods – Inventory customer owned ingot or semi-finished goods at Titan to allow flexibility for Titan to subsequently finish to customer designated final size or sizes as the forecast requirement becomes more readily apparent to the customer.
• Indices Pricing – Titan has the ability to provide public indices for long-term pricing of non-titanium metals.  Additionally Titan can provide a mutually agreed upon mechanism for validation of marketplace price of titanium for future price changes over the longer term either up or down.
• Vendor Managed Inventory – Total Program Management whereby Titan can manage all metals requirements through our global distribution network or any portion of it.

Please contact your Titan Engineering sales representative to discuss your requirements in more detail.

Some of the applications like architectural items require materials to be shiny and polished for aesthetic purposes. We can supply products in highly polished and buffed condition, free of any scratches and lines.