CP Grade 11

Common Name
CP Grade 11
Ti – Palladium
CP Grade 1 with Palladium
General Information
Titanium Grade 11 is the equivilent of Grade 1 but with a palladium addition which imparts a significant improvement in resistance to general and localized crevice corrosion in a wide range of reducing acid environments, including chlorides, and where low pH and high temperatures above 180째 F (83째 C) to 500째 F (260째 C) are prevalent. The alloy is available as castings, wire, bar, plate, sheet, forgings, pipe, tubing and billet.
Common Specification
Specification Product Form
ASME SB-265 Sheet, Strip and Plate
ASME SB-337 Pipe, Seamless and Welded
ASME SB-338 Tube, Seamless and Welded
ASME SB-348 Bar and Billet
ASTM B265 (Grade 11) Strip, Sheet and Plate
ASTM B348 (Grade 11) Bar and Billet
ASTM B367 (Grade 11) Castings
ASTM B861 (Grade 11) Seamless Pipe
ASTM B862 (Grade 11) Welded Pipe
AWS A5.16 (ERTi-11) Weld Wire
AWS A5.16 (ERTi-17) Weld Wire

* Replacing ASTM B337

Chemistry Requirements
N C >H Fe O Pd Residual Each Max Residuals Max Total Ti
0.03 0.08 0.015 0.20 0.18 0.12-0.15 0.1 0.4 Balance

% Maximum unless given as a range.
Note: Chemical requirements are not consistent between specifications. Check referenced specifications.

Minimum Tensile Properties
Condition UTS ksi (Mpa) >0.2%YS ksi (MPA) % El. % RA*
As specified (shape) 35 (240) 20 (138) 24 30


Typical Tensile Properties
Condition UTS ksi (Mpa) >0.2%YS ksi (MPA) % El. % RA*
As provided 50 (345) 32 (221) 37

Note: Typical properties are not to be utilized as a requirement, but are only listed for guidance. These properties may or may not be attainable in all circumstances.
* %Ra not required by all specifications
Trademark Notice: Some names are trade names and/or trademarks of specific manufacturers. Titan Singapore is not affiliated with any manufacturer(s). Orders will be filled to meet specifications from any available source(s). Names are listed solely for reference to help identify products consistent with listed specifications.