Loading...

CP Grade 2

Common Name
CP Grade 2
Titanium Grade 2
UNS
R50400
General Information
Titanium Alloy Grade 2 is “unalloyed” titanium offering an excellent balance of strength and ductility. The material has good toughness and is readily weldable. This material is very corrosion resistant in highly oxidizing and mildly reducing environments. The material is castable and is often utilized in cast valves and fittings. In plate form, the alloy is also used explosively boned to make clad plate. The alloy is available as castings, wire, welded tube, pipe, plate, sheet, strip, forgings, bar, and billet.
Common Specification
Specification Product Form
AMS 4902 Strip, Sheet and Plate
AMS 4941 Welded Tubing
AMS 4942 Seamless Tubing
AMS 4951 Wire, Welding
ASME SB265 Sheet, Strip, and Plate
ASME SB348 Bar and Billet
ASME SB367 Casting
ASME SB381 Forgings
ASTM B265 (Grade 2) Strip, Sheet, and Plate
ASTM B338 Tube, Seamless and Welded
ASTM B348 (Grade 2) Bar and Billet
ASTM B363 Fittings
ASTM B367 (Grade 2) Castings
ASTM B381 Forgings
ASTM B861 Seamless Pipe
ASTM B862 Welded Pipe
ASTM B863 Wire
ASTM B831 Forgings
ASTM F67 (Grade 2) Unalloyed Titanium for Surgical Implants
AWS A5.16 ERTi-2 Weld Wire
ISO 5832-2 (Grade 2) Unalloyed Titanium for Surgical Implants

 

Chemistry Requirements
N C >H Fe O Residual Each Max Residuals Max Total Ti
0.03 0.8 0.015 0.30 0.25 0.1 0.4 Balance

 
% Maximum unless given as a range.
 

Minimum Tensile Properties
Condition UTS ksi (Mpa) >0.2%YS ksi (MPA) % El. % RA*
As specified (shape) 50 (345) 40 (275) 20 30

 

Typical Tensile Properties
Condition UTS ksi (Mpa) >0.2%YS ksi (MPA) % El. % RA*
As provided 70 (483) 51 (352) 28

 
Note: Typical properties are not to be utilized as a requirement, but are only listed for guidance. These properties may or may not be attainable in all circumstances.
* %Ra not required by all specifications
 
Trademark Notice: Some names are trade names and/or trademarks of specific manufacturers. Titan Singapore is not affiliated with any manufacturer(s). Orders will be filled to meet specifications from any available source(s). Names are listed solely for reference to help identify products consistent with listed specifications.