Loading...

Titanium Grade 6

Common Name
Titanium Grade 6 MMA-5137
Ti-5Al-2.5Sn A-110AT
Ti-5-2.5
UNS
R54520
General Information
Ti-5Al-2.5Al has good weldability and shows stability and oxidation resistance at elevated temperatures (600 – 1000°F). Applications are forgings and sheet metal parts such as jet turbine compressor blades, ducting, and steam turbine blades. The alloy is a more difficult alloy to forge with a narrow forgeability range and greater yield loss. This alpha alloy is available in bar, billet, castings, extrustions, plate, sheet, and wire.
Common Specification
Specification Product Form
AMS 4910 Strip, Sheet and Plate, Annealed
AMS 4926 Bar and Ring, Annealed
AMS 4966 Forgings, Annealed
ASTM B265 (Grade 6) Strip, Sheet and Plate
ASTM B348 (Grade 15) Bar and Billet
ASTM B381 (Grade 15) Forgings
MIL-T-9046 Strip, Sheet and Plate
MIL-T-9047 Bar, Re-forging
MIL-T-81556 Extrusions
MIL-F-83142 Forgings

 

Chemistry Requirements
N C H Fe O Al Sn Y Residuals Each Max Residuals Max Total Ti
0.05 0.08 0.02 0.50 0.20 4.5-5.75 2.0-3.0 0.005 0.1 0.4 Balance

 
% Maximum unless given as a range.
Note: Chemical requirements are not consistent between specifications. Check referenced specifications.
 

Minimum Tensile Properties
Condition UTS ksi (Mpa) >0.2%YS ksi (MPA) % El. % RA* Size
Forged Bars 115 (792) 110 (758) 10 25 <4”

 

Typical Tensile Properties
Condition UTS ksi (Mpa) >0.2%YS ksi (MPA) % El. % RA* Size
Sheet and Plate, Annealed 120 (827) 113 (779) 10 <1.5”

 
Note: Typical properties are not to be utilized as a requirement, but are only listed for guidance. These properties may or may not be attainable in all circumstances.
* %Ra not required by all specifications
 
Trademark Notice: Some names are trade names and/or trademarks of specific manufacturers. Titan Singapore is not affiliated with any manufacturer(s). Orders will be filled to meet specifications from any available source(s). Names are listed solely for reference to help identify products consistent with listed specifications.